Stacking and destacking of 2 pallet sizes

PALOMAT® Adjustable

Air plus electric driven pallet dispenser

With the pallet magazine/ pallet dispenser PALOMAT® Adjustable - which is a part of our Stand Alone line - you can handle 1200x800 mm and 1200x1000 mm pallets in one and same magazine. The shift between the two pallet sizes takes approximately 5 seconds – a light press on a button plus a manual push or pull in the pallet magazine’s left side, which will afterwards adjust.

You insert or remove the pallets using a hand pallet truck, electric stacker or a full-size forklift truck. All handling is carried out at floor level. The PALOMAT® Adjustable detects the pallets via photo sensors after which they are fully automatic stacked or destacked one by one.

When selecting destacking, a stack of no more than 15 will be inserted in the PALOMAT®, after which the pallets are fully automatic destacked one by one. When selecting stacking, the pallets are inserted one by one, after which the pallets are fully automatic stacked to no more than 15 pallets. The entire stack can subsequently be removed.

PALOMAT® Adjustable is fully automatic and only operated manually using the touch panel when there is to be a change between stacking and destacking or vice versa.

Contact the PALOMAT® sales department for further information.

Pallet magasin PALOMAT® Adjustable with safety frame for 15 pallets - 1200x800 mm pallets
Pallet magasin PALOMAT® Adjustable with safety frame for 15 pallets - 1200x1000 mm pallets
Adjustable left side of the pallet magasin PALOMAT® Adjustable
Touch panel on PALOMAT® Adjustable
Learn more about to use a PALOMAT® Adjustable
Learn more about all the benefits of using PALOMAT®

Need more info about the PALOMAT® Adjustable

Capacity - 500 kg

Air supply:

6-7 bar

Consumption:

36 litres per cycle

Power source:

100-240 VAC / 50-60 Hz

Standby Consumption:

16 W

Consumption during operation:

20 W

Noise Level:        

70 dB(A)

Max Fuse

16A D01

Air components:

SMC

Steering:

Siemens S7-1200

 

As the PALOMAT® is equipped with various sensors, wires and pipes, cleaning must only be carried out with a weak alkaline cleaning agent. The PALOMAT® must not be flushed, but only wiped with a damp cloth.

Contact the PALOMAT® sales department for further information.

PALOMAT® Adjustable for 15 pallets

Product No. Pallet size (L x B x H) Lifting capacity Number of pallets

150060 1200x800x150/ 1200x1000x150 500 kg 15 pallets

Note: The safety frame for 15 pallets for PALOMAT® Adjustable is required.

 

Contact the PALOMAT® sales department for further information.

For pallet magazine PALOMAT® Adjustable we offer the following options:

Option - Safety frame with gate for 15 pallets for pallet magazine PALOMAT®
Safety frame with gate for 15 pallets

The gate is a part of the safty frame and is mounted for added safety. The PALOMAT® can only be operated when the gate is closed and locked with the gate safety switch. The gate covers the right front from the top of the second pallet at floor level to the top of the safety frame.

Option - Maximum indicator for pallet magazine PALOMAT
Maximum indicator

A Sick-sensor for indicating when a pallet stack automatically should be destacked onto the floor.

If the user for examples wants the PALOMAT® to stop at 15 pallets, a maximum indicator can be mounted on the safety frame or on a pole. When the maximum indicator indicates the specified number of pallets, the stack is automatically put on the floor. The stack is then ready for pickup by for example a stacker.

The function can also be done manually using the touch panel.

Option - Signal tower incl. maximum indicator for pallet magazine PALOMAT®
Signal tower incl. maximum indicator

A signal tower including a Sick sensor that detects when the pallet stack is full.

If the PALOMAT® needs to stop e.g. at 15 pallets, the signal tower with a maximum indicator can be mounted on the safety frame or on a bar. When the maximum indicator is actuated, e.g. at 15 pallets, the lamp lights and the stack is automatically put down on the floor. The stack is then ready for pick-up, e.g. by a hand pallet truck.

Option - Truck protection for the pallet magazine PALOMAT
Truck protection

The truck protection is produced in 10 mm steel and can be offered as an extra protection of the front sensors.

The truck protection is two separate parts, which are mounted into the floor in front of the PALOMAT®. The solution is used especially by companies, which handle pallets by forklifts.

Option - Stopblocks for the pallet magazine PALOMAT®
Stopblocks

The stop blocks are a perfect option when the PALOMAT® needs to handle pallets where the runners at the bottom are crosswise to the hand pallet truck. When pulling out the hand pallet truck from the PALOMAT®, the two stop blocks hold the pallet in place, keeping it in the magazine.

The stop blocks are installed at the front of the PALOMAT®, one on each side next to the front sensors.

Option - Switch disconnector for the pallet magazine PALOMAT
Switch disconnector

The switch disconnector enables disconnection from the main supply right on the machine. The switch disconnector can be locked, e.g. when servicing the machine.

This is an advantage and a safety feature for maintenance of the PALOMAT® unit. The switch disconnector is positioned under the main supply.

Option - Shut Of Valve for PALOMAT® pallet magazine
Shut Of Valve

The shut off valve enables disconnection from the air supply right on the machine. The shut off valve can be locked, e.g. when servicing the machine.

This is an advantage and a safety feature for maintenance of the PALOMAT® unit. The shut of valve is installed directly on the filter regulator.

Option - Prepared for AGV
Prepared for AGV

Prepared for communication with AGV Truck. The PALOMAT® sends a message to the AGV, when the magazine is empty/ full, is ready for delivering/receiving pallets or in case of error respectively.

Prepared for information via SMS/E-mail
Prepared for information via SMS/E-mail

An interface sends an e-mail or SMS to the responsible for the PALOMAT®, e.g. when the magasin is empty or when there is an error with the PALOMAT®. It is installed with a mobile data sim-card (delivered by the customer) or a patchcabel, which is connected to the company’s network.

Brochures
PALOMAT Pallemagasin - Brochure
Data sheets
PALOMAT Pallemagasin - datablad
Feature videos
PALOMAT Pallemagasin - Funktionsvideo
Installation videos
PALOMAT Pallemagasin - Installationsvideo

Contact information

 
Company name 
 
Address 
 
Postcode/City 
 
Contact person 
 
Phone no. 
 
E-mail 
 
Country 
 



What is your goal by optimising your pallet handling with PALOMAT®:

  
  
  
  
  
 

PALOMAT® Adjustable related products

A tidier work place · Improved work environment · Increased earnings

@2017 - PALOMAT®